Quick3D Polymaker PolyCore TPU-2000
PolyCore · TPU pellets for Pellet extrusion
Overview
Thermoplastic polyurethane pellet grade for pellet-fed printers, with a Shore hardness around 95A for producing flexible parts.
Summarised from the Polymaker product page.
- Material type
- Flexible
- Brand family
- PolyCore
- Polymer
- TPU
- Processing technology
- Pellet extrusion
- Material form
- Pellets
- Manufacturer
- Polymaker
- Reinforcements
- None
Characteristics
- ESD-safeStatic-dissipative (surface resistivity 10⁹ Ω/sq or lower) — safe around sensitive electronics.
- FlexibleRubber-like material that bends and springs back.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.3g/cm³ ASTM D792 (ISO 1183, GB/T 1033)
- 5.6g/10 min 230 °C, 2.16 kg
- 10 × 10⁵ (dry state)Ω/sq ASTM D991 (GB/T 2439, ISO 1853)
Thermal
- 187°C DSC, 10 °C/min
- 149°C DSC, 10 °C/min
Mechanical
- 36.9 ± 3.2MPa ASTM D638 (ISO527, GB/T 1040)
- 558.5 ± 57.8% ASTM D638 (ISO527, GB/T 1040)
- ~95A ASTM D2240 (ISO 7619, GB/T 31)
Versus other TPU
See where it ranks against the 4 other TPU materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.