Quick3D Polymaker PolyDissolveS1
PolyDissolve · HIPS filament for FFF
Overview
PVA-based support filament that dissolves in water, made to pair with PLA, TPU, PVB and nylon prints and suited to complex overhangs and internal cavities in multi-material jobs.
Summarised from the Polymaker product page.
- Material type
- Support
- Brand family
- PolyDissolve
- Polymer
- HIPS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- None
Characteristics
- Dissolvable supportSupport material that is removed after printing — dissolved or broken away.
Certifications
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.13g/cm³ ISO1183, GB/T1033
- 7.8 g /10mig/10 min 210°C, 2.16kg
Chemical resistance
Versus other HIPS
See where it ranks against the 1 other HIPS material we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.