Quick3D 3DXTECH CarbonX Carbon Fiber PEKK-A CF15 [AERO]
CarbonX · PEKK filament for FFF
Overview
PEKK-A (60/40 copolymer) reinforced with 15% carbon fiber, offering PAEK-class heat, chemical and flame resistance with low smoke. Described as easier to print than carbon fiber PEEK.
Summarised from the 3DXTECH product page.
- Material type
- High Performance
- Brand family
- CarbonX
- Polymer
- PEKK
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Certifications
- UL 94 V-0Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
As stated by 3DXTECH. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.33g/cm³ ISO 1183
- >10⁷Ω/sq ASTM D257
Thermal
- 165°C DSC
- 305°C DSC
- 285°C ISO 75, 0.45 MPa
Mechanical
- 9125MPa ISO 527
- 126MPa ISO 527
- 3.15% ISO 527
- 8817MPa ISO 178
- 178MPa ISO 178
Versus other PEKK
See where it ranks against the 3 other PEKK materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.