Quick3D 3DXTECH CarbonX PP+CF
CarbonX · PP filament for FFF
Overview
A carbon-fibre-reinforced polypropylene copolymer filament developed for 3D printing. It prints easily, holds its dimensions well and gives an attractive surface; its low density means a full reel holds 650 g.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- PP
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.1g/cm³ ISO 1183
- >10⁸Ω/sq ASTM D257
Thermal
- 124°C ISO 75, 0.45 MPa
Mechanical
- 6150MPa ISO 527
- 78MPa ISO 527
- 1.5% ISO 527
- 6100MPa ISO 178
- 68MPa ISO 178
Versus other PP
See where it ranks against the 2 other PP materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.