Quick3D 3DXTECH 3DXSTAT ESD-Ultem 1010
3DXSTAT · PEI filament for FFF
Overview
ESD-safe filament based on ULTEM 1010 PEI with carbon additives, combining static control (10^4 to 10^9 ohm) with high heat, flame and chemical resistance. Aimed at demanding, cleanliness-critical ESD applications.
Summarised from the 3DXTECH product page.
Features
- Material type
- High Performance
- Brand family
- 3DXSTAT
- Polymer
- PEI
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- ESD-safeStatic-dissipative (surface resistivity 10⁹ Ω/sq or lower) — safe around sensitive electronics.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.34g/cm³ ISO 1183
- 10⁷ - 10⁹Ω/sq ASTM D257
Thermal
- 217°C DSC
- 205°C ISO 75, 0.45 MPa
Mechanical
- 2710MPa ISO 527
- 62MPa ISO 527
- 4% ISO 527
- 2690MPa ISO 178
- 115MPa ISO 178
Versus other PEI
See where it ranks against the 5 other PEI materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.