Quick3D 3DXTECH CarbonX 20% Carbon Fiber PEEK
CarbonX · PEEK filament for FFF
Overview
3DXTECH CarbonX 20% Carbon Fiber PEEK is a high performance PEEK filament for FFF printing, made by 3DXTECH.
- Material type
- High Performance
- Brand family
- CarbonX
- Polymer
- PEEK
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber 20%
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- ESD-safeStatic-dissipative (surface resistivity 10⁹ Ω/sq or lower) — safe around sensitive electronics.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.39g/cm³ ISO 1183
- <10⁶Ω/sq ASTM D257
Thermal
- 143°C DSC
- 305°C ISO 75 1.8MPa
Mechanical
- 10100MPa ISO 527
- 126MPa ISO 527
- 1.9% ISO 527
- 11200MPa ISO 178
- 145MPa ISO 178
Versus other PEEK
See where it ranks against the 3 other PEEK materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.