Quick3D 3DXTECH CarbonX Carbon Fiber High Temp Nylon (HTN)
CarbonX · HTN filament for FFF
Overview
High-temperature nylon with high-modulus carbon fiber reinforcement, offering stiffness, thermal stability, low moisture uptake and strong chemical resistance. Used for heat-exposed performance parts, tools and fixtures.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- HTN
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
- Tooling
- Fixtures
- High-Performance Parts
- Functional, load-bearing parts
- Jigs, fixtures and tooling
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.24g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 125°C DSC
- 265°C DSC
- 240°C ISO 75, 0.45 MPa
Mechanical
- 8200MPa ISO 527
- 87MPa ISO 527
- 1.9% ISO 527
- 7895MPa ISO 178
- 95MPa ISO 178
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.