Quick3D Overview
A US-made PLA filament produced from virgin NatureWorks plant-based resin and quality colourants. Compatible with nearly all desktop printers, it is easy to print, stiff and visually sharp, suiting concept models, prototypes and finished parts.
Summarised from the 3DXTECH product page.
- Material type
- Standard
- Brand family
- EcoMax
- Polymer
- PLA
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- BiobasedMade mainly from renewable plant sources. Shown for PLA-based materials — PLA is produced from plant sugars such as corn or sugarcane.
Applications
- Prototypes
- Concept Models
- End-Use Parts
- Prototypes and concept models
- Functional, load-bearing parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.24g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 55°C DSC
- 80°C ISO 75, 0.45 MPa
Mechanical
- 2865MPa ISO 527
- 56MPa ISO 527
- 8% ISO 527
- 3185MPa ISO 178
- 115MPa ISO 178
Versus other PLA
See where it ranks against the 16 other PLA materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.