Quick3D 3DXTECH FibreX PA12+GF30
FibreX · PA12 filament for FFF
Overview
A Nylon 12 copolymer filament loaded with 30% glass fibre for industrial use. It is very stiff and strong without becoming brittle, and keeps the good mechanical, chemical and thermal resistance typical of polyamides.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- FibreX
- Polymer
- PA12
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Glass Fiber 30%
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.23g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 158°C DSC
- 150°C ISO 75, 0.45 MPa
Mechanical
- 7800MPa ISO 527
- 82MPa ISO 527
- 4.5% ISO 527
- 7550MPa ISO 178
- 94MPa ISO 178
Versus other PA12
See where it ranks against the 4 other PA12 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.