Quick3D 3DXTECH SimuBone Bone Simulation
SimuBone filament for FFF
Overview
A PLA-based filament with special additives that give printed parts the appearance and feel of real bone. Easy to print on most machines, it is used to make lifelike bone models for teaching and clinical work.
Summarised from the 3DXTECH product page.
Features
- Material type
- Specialty
- Brand family
- SimuBone
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Certifications
- ISO 22196 antibacterial (datasheet)Tested to ISO 22196 for antibacterial activity on the surface of the plastic.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.34g/cm³ ISO 1183
Thermal
- 55°C DSC
- 89°C ISO 75, 0.45 MPa
Mechanical
- 3410MPa ISO 527
- 65MPa ISO 527
- 4% ISO 527
- 3355MPa ISO 178
- 122MPa ISO 178
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.