Quick3D Dow EVOLV3D Olefin Block Copolymer (OBC)
EVOLV3D · OBC filament for FFF
Overview
A polyethylene-based olefin block copolymer filament that brings polyolefin properties to 3D printing, with markedly improved warpage and printability for lightweight, durable, chemically resistant parts.
Features
- Material type
- Flexible
- Brand family
- EVOLV3D
- Polymer
- OBC
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Dow
- Reinforcements
- None
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- FlexibleRubber-like material that bends and springs back.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 0.905g/cm³ ASTM D792
- 9.5g/10 min ASTM D1238 (2.16 kg @ 230 C)
Thermal
- 130°C DSC
Mechanical
- 14MPa ASTM D1708
- >700% ASTM D1708
Chemical resistance
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the Dow technical data sheet. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.