Quick3D Polymaker PC-PBT
Polymaker · PC/PBT filament for FFF
Overview
Blend of polycarbonate and PBT with good heat and chemical resistance that stays tough at sub-zero temperatures. Printing it requires an industrial-style printer able to hold chamber air above 90 °C.
Summarised from the Polymaker product page.
- Material type
- Engineering
- Brand family
- Polymaker
- Polymer
- PC/PBT
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- None
Characteristics
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.2g/cm³ ISO1183, GB/T1033
- 16-22g/10 min 210°C, 2.16kg
Thermal
- 140°C DSC, 10°C/min
- 223°C DSC, 10°C/min
- 186°C DSC, 10°C/min
- 139°C ISO 306, GB/T 1633
- 91°C ISO 75, 1.8MPa
Mechanical
- 1940.2 ± 76.5MPa ISO 527, GB/T 1040
- 50.4 ± 0.6MPa ISO 527, GB/T 1040
- 4.6 ± 0.7% ISO 527, GB/T 1040
- 1950.3 ± 142.6MPa ISO 178, GB/T 9341
- 77.3 ± 0.3MPa ISO 178, GB/T 9341
- 33.0 ± 0.3 kJ/m² ISO 179, GB/T 1043
- 13 ± 2 kJ/m² ISO 179-1, 1eA:2010,-30°C
Chemical resistance
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.