Quick3D Polymaker PolyCore PETG-1000
PolyCore · PETG pellets for Pellet extrusion
Overview
Unfilled PETG pellet for medium- and big-area additive manufacturing, offering easy printing, low cost and a distinctive visual finish for interior pieces.
Summarised from the Polymaker product page.
Features
- Material type
- Standard
- Brand family
- PolyCore
- Polymer
- PETG
- Processing technology
- Pellet extrusion
- Material form
- Pellets
- Manufacturer
- Polymaker
- Reinforcements
- None
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.3g/cm³ ASTM D792 (ISO 1183, GB/T 1033)
- 11g/10 min 240 °C, 2.16 kg
Thermal
- 81°C DSC, 10 °C/min
- 84°C ASTM D1525 (ISO 306 GB/T 1633)
- 62°C ISO 75 1.8MPa
Mechanical
- 1744 ± 105MPa ASTM D638 (ISO 527, GB/T 1040)
- 37.4 ± 5.8MPa ASTM D638 (ISO527, GB/T 1040)
- 11.2 ± 2.7% ASTM D638 (ISO527, GB/T 1040)
- 1831 ± 110MPa ASTM D790 (ISO 178, GB/T 9341)
- 41.4 ± 3.4MPa ASTM D790 (ISO 178, GB/T 9341)
- 36.5 ± 3.0kJ/m² ASTM D256 (ISO 179, GB/T 1043)
Versus other PETG
See where it ranks against the 11 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.