Quick3D Polymaker PolyCore PETG-1211
PolyCore · PETG pellets for Pellet extrusion
Overview
PETG pellets containing 10% glass fiber by mass, aimed at middle-area additive manufacturing with an emphasis on smooth printing and low cost.
Summarised from the Polymaker product page.
Features
- Material type
- Engineering
- Brand family
- PolyCore
- Polymer
- PETG
- Processing technology
- Pellet extrusion
- Material form
- Pellets
- Manufacturer
- Polymaker
- Reinforcements
- Glass Fiber 10%
Characteristics
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.30g/cm³ ASTM D792 (ISO 1183, GB/T 1033)
- 20-24g/10 min 230 °C, 2.16 kg
Thermal
- 70°C DSC, 10 °C/min
- 80°C ASTM D1525 (ISO 306 GB/T 1633)
- 63°C ISO 75 1.8MPa
Mechanical
- 3288 ± 85MPa ASTM D638 (ISO 527, GB/T 1040)
- 68.1 ± 0.8MPa ASTM D638 (ISO527, GB/T 1040)
- 3.5 ± 0.42% ASTM D638 (ISO527, GB/T 1040)
- 3332 ± 69MPa ASTM D790 (ISO 178, GB/T 9341)
- 93.2 ± 2.7MPa ASTM D790 (ISO 178, GB/T 9341)
- 4.5 ± 0.3kJ/m² ASTM D256 (ISO 179, GB/T 1043)
Versus other PETG
See where it ranks against the 11 other PETG materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.