Quick3D 3DXTECH CarbonX Carbon Fiber PEEK
CarbonX · PEEK filament for FFF
Overview
PEEK filled with 10% chopped high-modulus carbon fiber for stiffness, strength and dimensional stability at high temperature, plus near-zero moisture uptake. Needs an industrial printer with a heated chamber.
Summarised from the 3DXTECH product page.
- Material type
- High Performance
- Brand family
- CarbonX
- Polymer
- PEEK
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
- Aerospace
- Automotive
- Defense
- Oil & Gas
- Functional, load-bearing parts
- Jigs, fixtures and tooling
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.39g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 143°C DSC
- 265°C ISO 75, 0.45 MPa
Mechanical
- 8100MPa ISO 527
- 105MPa ISO 527
- 3% ISO 527
- 8300MPa ISO 178
- 136MPa ISO 178
Versus other PEEK
See where it ranks against the 3 other PEEK materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.