Quick3D 3DXTECH Firewire Flame Retardant PC/ABS
FireWire · PC/ABS filament for FFF
Overview
A flame-retardant PC/ABS alloy filament made from a UL94 V-0 rated resin. It pairs polycarbonate's strength and heat resistance with ABS-like printability, outperforming ABS on strength and HDT, for parts needing self-extinguishing behaviour.
Summarised from the 3DXTECH product page.
Features
- Material type
- Engineering
- Brand family
- FireWire
- Polymer
- PC/ABS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
As stated by 3DXTECH. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.24g/cm³ ISO 1183
- V-0 UL 94, 1.5 mm (base resin)
Thermal
- 137°C DSC
- 125°C ISO 75, 0.45 MPa
Mechanical
- 2250MPa ISO 527
- 60MPa ISO 527
- 10% ISO 527
- 2300MPa ISO 178
- 85MPa ISO 178
Versus other PC/ABS
See where it ranks against the 3 other PC/ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.