Quick3D 3DXTECH ThermaX PEEK
ThermaX · PEEK filament for FFF
Overview
A PEEK filament, an ultra-high-performance polymer with outstanding mechanical, thermal and chemical resistance for critical applications. It requires industrial conditions: a 360-450C hot end, a 120-160C bed and an actively heated enclosed chamber.
Summarised from the 3DXTECH product page.
- Material type
- High Performance
- Brand family
- ThermaX
- Polymer
- PEEK
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0 (base resin, datasheet rating)Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
"Datasheet" means the rating is stated on the manufacturer's datasheet, not a separate certificate. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.30g/cm³ ISO 1183
- V-0 UL 94, 1.5 mm (base resin)
Thermal
- 143°C DSC
- 140°C ISO 75, 0.45 MPa
Mechanical
- 3720MPa ISO 527
- 100MPa ISO 527
- 28% ISO 527
- 2700MPa ISO 178
- 130MPa ISO 178
Versus other PEEK
See where it ranks against the 3 other PEEK materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.