Quick3D Overview
Weatherable ASA filament that holds up under UV and sunlight, with a matte, low-sheen surface and a Tg of 105C. A good fit for outdoor parts and technical-looking prints.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- 3DXMAX
- Polymer
- ASA
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.07g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 105°C DSC
- 95°C ISO 75, 0.45 MPa
Mechanical
- 2010MPa ISO 527
- 45MPa ISO 527
- 10% ISO 527
- 2000MPa ISO 178
- 78MPa ISO 178
Versus other ASA
See where it ranks against the 5 other ASA materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.