Quick3D 3DXTECH CarbonX Carbon Fiber ASA
CarbonX · ASA filament for FFF
Overview
ASA filled with 15% high-modulus carbon fiber, giving stiff, light, dimensionally stable parts with a matte finish and UV stability for outdoor use. Print through a hardened steel nozzle.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- ASA
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- Outdoor / UVResists sunlight and weather without yellowing or going brittle.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
- Outdoor Parts
- Structural Parts
- Jigs, fixtures and tooling
- High-temperature parts
- Outdoor, UV-exposed parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.11g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 105°C DSC
- 97°C ISO 75, 0.45 MPa
Mechanical
- 5355MPa ISO 527
- 48MPa ISO 527
- 3% ISO 527
- 5210MPa ISO 178
- 78MPa ISO 178
Versus other ASA
See where it ranks against the 5 other ASA materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.