Quick3D 3DXTECH FibreX ABS+GF10 Glass Fiber ABS
FibreX · ABS filament for FFF
Overview
ABS filament reinforced with a glass fibre chosen for compatibility with FFF printing. It is tough, stiff and strong, letting users build structural parts with less lifting and warping than unfilled ABS.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- FibreX
- Polymer
- ABS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Glass Fiber 10%
Characteristics
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.15g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 105°C DSC
- 98°C ISO 75, 0.45 MPa
Mechanical
- 4210MPa ISO 527
- 68MPa ISO 527
- 2% ISO 527
- 4420MPa ISO 178
- 70MPa ISO 178
Versus other ABS
See where it ranks against the 9 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.