Quick3D 3DXTECH Firewire Flame Retardant ABS
FireWire · ABS filament for FFF
Overview
A flame-retardant ABS filament rated UL94 V-0 that produces durable parts with good strength and dimensional stability. It prints more smoothly than many industrial materials and serves safety-critical uses in automotive, aerospace and electronics.
Summarised from the 3DXTECH product page.
Features
- Material type
- Engineering
- Brand family
- FireWire
- Polymer
- ABS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- Flame retardantUL 94 rating of V-0, V-1 or V-2 — stops burning on its own once the flame is removed.
Certifications
- UL 94 V-0Flammability rating from the UL 94 test. V-0 is the highest common rating: the flame goes out within 10 seconds with no burning drips.
As stated by 3DXTECH. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.18g/cm³ ISO 1183
- V-0 UL 94, 1.5 mm (base resin)
Thermal
- 105°C DSC
- 95°C ISO 75, 0.45 MPa
Mechanical
- 1990MPa ISO 527
- 45MPa ISO 527
- 4% ISO 527
- 2250MPa ISO 178
- 80MPa ISO 178
Versus other ABS
See where it ranks against the 9 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.