Quick3D Polymaker ABS-Max
Polymaker · ABS filament for FFF
Overview
The top-performing ABS in Polymaker's range, with the highest heat deflection of its ABS grades, good stiffness and impact strength, and improved creep resistance. Designed for fast printing in actively heated build chambers.
Summarised from the Polymaker product page.
- Material type
- Engineering
- Brand family
- Polymaker
- Polymer
- ABS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- Polymaker
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
Certifications
- RoHSFree of restricted hazardous substances such as lead, mercury and cadmium (EU RoHS directive) — needed for electrical and electronic products sold in the EU.
- REACHComplies with the EU REACH regulation on chemicals — no substances of very high concern above the allowed limits.
As stated by Polymaker — RoHS and REACH are Polymaker declarations covering its whole product range. Ask us for the certificate if you need it for an audit.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.06g/cm³ ISO1183, GB/T1033
- 6.6g/10 min 210°C, 2.16 kg
Thermal
- 126.3°C DSC, 10°C/min
- 433.0°C TGA, 20°C/min
- 127.4°C ISO 306, GB/T 1633
- 118.1°C ISO 75 0.45MPa
Mechanical
- 2.32 ± 0.03MPa ISO 527, GB/T 1040
- 35.66 ± 0.58MPa ISO 527, GB/T 1040
- 6.72 ± 0.34% ISO 527, GB/T 1040
- 2.50 ± 0.07MPa ISO 178, GB/T 9341
- 63.29 ± 1.19MPa ISO 178, GB/T 9341
- 10.51 ± 0.67kJ/m² ISO 179, GB/T 1043
- 8.01 ± 0.77kJ/m² ISO 179, GB/T 1043
Chemical resistance
Versus other ABS
See where it ranks against the 9 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.