Quick3D Polymaker PolyCore ABS-5012
PolyCore · ABS pellets for Pellet extrusion
Overview
ABS pellets reinforced with 20% glass fiber, offering cost-effective printing with balanced mechanical properties. Intended for pellet-fed printing of tooling at low to moderate temperatures and other general uses.
Summarised from the Polymaker product page.
Features
- Material type
- Engineering
- Brand family
- PolyCore
- Polymer
- ABS
- Processing technology
- Pellet extrusion
- Material form
- Pellets
- Manufacturer
- Polymaker
- Reinforcements
- Glass Fiber 20%
Characteristics
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Applications
- Low-Temperature Tooling
- Concrete Molds
- General Prototyping
- Functional, load-bearing parts
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.21g/cm³ ASTM D792 (ISO 1183, GB/T 1033)
- 12.7g/10 min
Thermal
- 96°C DSC, 10 °C/min
- 109°C ASTM D1525 (ISO 306 GB/T 1633)
- 96°C ISO 75 1.8MPa
Mechanical
- 3994 ± 159MPa ASTM D638 (ISO 527, GB/T 1040)
- 74.6 ± 3.8MPa ASTM D638 (ISO527, GB/T 1040)
- 9.7 ± 0.7% ASTM D638 (ISO527, GB/T 1040)
- 5410 ± 519MPa ASTM D790 (ISO 178, GB/T 9341)
- 107.2 ± 4.4MPa ASTM D790 (ISO 178, GB/T 9341)
- 9.9 ± 1.6kJ/m² ASTM D256 (ISO 179, GB/T 1043)
Versus other ABS
See where it ranks against the 9 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.