Quick3D Polymaker PolyCore ABS-5022
PolyCore · ABS pellets for Pellet extrusion
Overview
ABS pellets with 20% carbon fiber, giving strength, stable dimensions, long service life and good heat conduction with fairly low thermal expansion. Aimed at large pellet-printed parts needing durability and some heat resistance.
Summarised from the Polymaker product page.
Features
- Material type
- Engineering
- Brand family
- PolyCore
- Polymer
- ABS
- Processing technology
- Pellet extrusion
- Material form
- Pellets
- Manufacturer
- Polymaker
- Reinforcements
- Carbon Fiber 20%
Characteristics
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.20g/cm³ ASTM D792 (ISO 1183, GB/T 1033)
- 11g/10 min 220 °C, 10 kg
Thermal
- 101°C DSC, 10 °C/min
- 113°C ASTM D1525 (ISO 306 GB/T 1633)
- 98°C ISO 75 1.8MPa
Mechanical
- 8093 ± 1457MPa ASTM D638 (ISO 527, GB/T 1040)
- 90 ± 3.0MPa ASTM D638 (ISO527, GB/T 1040)
- 0.7 ± 0.2% ASTM D638 (ISO527, GB/T 1040)
- 9742.4 ± 542MPa ASTM D790 (ISO 178, GB/T 9341)
- 128.7 ± 9.4MPa ASTM D790 (ISO 178, GB/T 9341)
- 47 ± 4.6kJ/m² ASTM D256 (ISO 179, GB/T 1043)
Versus other ABS
See where it ranks against the 9 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.