Quick3D 3DXTECH CarbonX Carbon Fiber ABS
CarbonX · ABS filament for FFF
Overview
ABS reinforced with 10% high-modulus carbon fiber for greater stiffness, dimensional stability and lower weight while staying easy to print. Used for structural parts; a hardened nozzle is recommended.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- ABS
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.11g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 105°C DSC
- 76°C ISO 75, 0.45 MPa
Mechanical
- 5210MPa ISO 527
- 46MPa ISO 527
- 2% ISO 527
- 5260MPa ISO 178
- 76MPa ISO 178
Versus other ABS
See where it ranks against the 9 other ABS materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.