Quick3D 3DXTECH CarbonX Carbon Fiber ezPC Polycarbonate
CarbonX · PC filament for FFF
Overview
Carbon fiber reinforced ezPC polycarbonate that prints at 260 to 280C on most desktop machines, delivering heat resistance, stiffness and very low shrinkage. Intended for engineering-grade structural parts.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- PC
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.36g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 127°C DSC
- 119°C ISO 75, 0.45 MPa
Mechanical
- 6980MPa ISO 527
- 73MPa ISO 527
- 2.1% ISO 527
- 6540MPa ISO 178
- 85MPa ISO 178
Versus other PC
See where it ranks against the 8 other PC materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.