Quick3D Polymaker PolyCore PC-7413
PolyCore · PC pellets for Pellet extrusion
Overview
Polycarbonate pellets reinforced with 30% glass fiber, developed for printing medium-temperature composite molds and tools that undergo autoclave curing up to 120°C, with good heat resistance and cost efficiency.
Summarised from the Polymaker product page.
Features
- Material type
- Engineering
- Brand family
- PolyCore
- Polymer
- PC
- Processing technology
- Pellet extrusion
- Material form
- Pellets
- Manufacturer
- Polymaker
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.36g/cm³ ASTM D792 (ISO 1183, GB/T 1033)
- 18.6g/10 min 300 °C, 1.2 kg
Thermal
- 141°C DSC, 10 °C/min
- 136°C 1.82MPa
Mechanical
- 4752 ± 175MPa ASTM D638 (ISO 527, GB/T 1040)
- 74.6 ± 1.9MPa ASTM D638 (ISO527, GB/T 1040)
- 2.39 ± 0.14% ASTM D638 (ISO527, GB/T 1040)
- 4939 ± 148MPa ASTM D790 (ISO 178, GB/T 9341)
- 108.2 ± 2.7MPa ASTM D790 (ISO 178, GB/T 9341)
Versus other PC
See where it ranks against the 8 other PC materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the Polymaker technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.