Quick3D 3DXTECH AmideX PA6 Copolymer
AmideX · PA6 filament for FFF
Overview
AmideX Nylon 6-66 is a nylon copolymer filament tuned for easy printing, with good strength, abrasion and wear resistance, and better chemical resistance than common filaments. Suited to engineering-grade functional parts.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- AmideX
- Polymer
- PA6
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Chemical resistantRated "Good" against at least four of the five chemical groups tested, or described as chemical resistant on the datasheet.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.12g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 76°C DSC
- 140°C ISO 75, 0.45 MPa
Mechanical
- 1980MPa ISO 527
- 55MPa ISO 527
- 100% ISO 527
- 2050MPa ISO 178
- 76MPa ISO 178
Versus other PA6
See where it ranks against the 6 other PA6 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.