Quick3D 3DXTECH AmideX PA6-GF30 Glass Fiber Nylon
AmideX · PA6 filament for FFF
Overview
Glass fiber reinforced PA6 copolymer filament (sold as FibreX Nylon 6+GF30) that is very stiff and strong without brittleness. Resists fuels, lubricants and heat, suiting structural automotive and industrial parts.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- AmideX
- Polymer
- PA6
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Glass Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Glass fiberReinforced with glass fiber for extra stiffness and heat resistance.
Applications
- Automotive Parts
- Industrial Parts
- Functional, load-bearing parts
- Jigs, fixtures and tooling
- High-temperature parts
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.35g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 70°C DSC
- 186°C ISO 75, 0.45 MPa
Mechanical
- 4261MPa ISO 527
- 62.8MPa ISO 527
- 6% ISO 527
- 3600MPa ISO 178
- 72MPa ISO 178
Versus other PA6
See where it ranks against the 6 other PA6 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.