Quick3D 3DXTECH CarbonX Carbon Fiber Nylon (Gen3)
CarbonX · PA6 filament for FFF
Overview
Third-generation carbon fiber PA6 copolymer filament with a higher HDT (147C at 0.45 MPa) than earlier grades. Very rigid and wear resistant, letting designers cut weight in hotter structural applications.
Summarised from the 3DXTECH product page.
- Material type
- Engineering
- Brand family
- CarbonX
- Polymer
- PA6
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- Carbon Fiber
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
- Carbon fiberReinforced with carbon fiber for extra stiffness and a matte finish.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.17g/cm³ ISO 1183
- >10⁹Ω/sq ASTM D257
Thermal
- 70°C DSC
- 147°C ISO 75, 0.45 MPa
Mechanical
- 3800MPa ISO 527
- 63MPa ISO 527
- 3% ISO 527
- 3750MPa ISO 178
- 84MPa ISO 178
Versus other PA6
See where it ranks against the 6 other PA6 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.