Quick3D 3DXTECH WearX Wear Resistant PA6 Copolymer
WearX · PA6 filament for FFF
Overview
A Nylon 6 filament modified for roughly three times the wear resistance of standard PA6, with a harder, matte surface and better dimensional stability. Designed for sliding and rotating parts once machined from filled nylon stock.
Summarised from the 3DXTECH product page.
Features
- Material type
- Engineering
- Brand family
- WearX
- Polymer
- PA6
- Processing technology
- FFF
- Material form
- Filament
- Manufacturer
- 3DXTECH
- Reinforcements
- None
Characteristics
- High tempHeat deflection temperature of 100 °C or more — keeps its shape in hot environments.
Applications
Based on this material's datasheet values. Every part is different — ask an engineer to confirm it suits yours.
Physical
- 1.18g/cm³ ISO 1183
- >10¹³Ω/sq ASTM D257
Thermal
- 76°C DSC
- 198°C DSC
- 143°C ISO 75, 0.45 MPa
Mechanical
- 2458MPa ISO 527
- 62MPa ISO 527
- 18% ISO 527
- 2215MPa ISO 178
- 70MPa ISO 178
Versus other PA6
See where it ranks against the 6 other PA6 materials we stock.
Typical values from each manufacturer's datasheet. Test methods can differ between brands, so treat small gaps as a tie.
Downloads
- Manufacturer datasheetSent on requestRequest
- Quick3D summaryThis page as a printable PDF
Values from the 3DXTECH technical data sheet and product page. Last updated . Typical values, not guaranteed minimums — see the disclaimer below.